I thought I solved the sizing issue with my Evotion male chastity device. I didn’t. As I wrote in my post yesterday, the new shaft section was 5/8 inches longer and a couple of millimeters wider. The idea was to take advantage of the ring that holds the head in place and allow more breathing room for my penis.

When Mrs. Lion locked it on, it seemed perfect. She had some trouble locking it together. That wasn’t the device’s fault, just lack of practice. Everything seemed to be exactly the way I hoped. However, within an hour the head of my penis had withdrawn into the shaft section while we were on the bed watching TV. My hope that a roomier cage would prevent a sore under the head couldn’t work.

The solution is probably to go back to the narrower shaft section. Some extra length might do the trick. Sizing this male chastity device has been a bit tricky for me. It’s not the fault of the device design or its seller, Evotion Wearables. It’s my wish to keep the head of my penis firmly in place. If I had a penis piercing, the device would be perfect. The piercing would fix my head to the top. I’m not prepared to be pierced again.

I might go back to the original shaft section. Perhaps if we approach locking me up by aligning the head of my penis before locking the shaft to the base ring, we can avoid any potential issues. I’ll talk it over with Mrs. Lion.

At this point, wearing a male chastity device is more to appeal to my love of bondage than it is to avoid unauthorized masturbation. My training has been very effective. I don’t even think about jerking off anymore. Mrs. Lion is happy if I remain wild. Maybe that’s the best thing at this point. I’m pretty sure I need a resized shaft section for my Orion. It takes about four weeks to get one designed and printed. Since I am out of work, we don’t have much spare cash. I may have to remain wild or go back to the Jail Bird or one of my other old devices. That’s too bad. I really love wearing my Evotion Orion. [Mrs. Lion — We’ll play around with getting the original to work. I think we’re on the right track with putting the shaft and cap together before connecting to the base ring. Don’t give up the ship just yet.]

At dinnertime I noticed Lion hadn’t put the coffee pot together. He still had time, of course, but I wasn’t going to remind him. We went on with our evening, watching mostly reruns. Around 10 I realized he hadn’t reminded me about punishment day. He agreed that he hadn’t. He didn’t even think about it. I hadn’t either till that moment. He had a punishment pending. And he still hadn’t remembered the coffee pot.

I don’t remember what time it was, but Lion discovered his error. He set off to the kitchen and fixed it. Apparently he didn’t want two punishments in one. He said one is definitely enough. I’m glad to hear that. I haven’t figured out how to scale a punishment up to a twofer. I just swat away until I think he’s gotten the message. He wanted me to time punishment, but five minutes is a really long time to spank. Plus, Lion’s butt gets way past red and starts bleeding. I’ve been trying to swat hard enough to make it count without making him bleed. I’m not always successful. [Lion comments — The question of how to punish me for multiple offenses has been one we have both considered. Mrs. Lion is right. She can’t really just double a spanking. It’s already fully disciplinary for one offense. I think the solution is to repeat the spanking at a later time or the next day. Fortunately for me, it’s very rare that I earn punishments close together in time.]

The lion needs a haircut. I know this because, on Thursday, Lion told me he needs a haircut. On Friday he told me multiple times he needs a haircut. Each time I told him I’d give him one. On Saturday, when he told me he needs a haircut, I said I was going to shave his head if he said he needs a haircut one more time. His excuse was that I never acknowledged it when he said he needs one. I call BS. Then he said I never gave him a specific time. That’s true. I did not. I did not specify Sunday at 4 pm or even Tuesday afternoon. So yesterday I told him it would be this afternoon. He hasn’t asked for a more specific time yet. I guess he doesn’t want a buzz cut. For the record, my plan is for mid to late afternoon so he can go right into the shower and I can head out to mow the lawn. Mow the Lion, mow the lawn. It seems fitting.

Oh, and his punishment? I think that should happen right before his haircut so he has to sit on sore buns. That seems fitting too.

October turned out to be a 3-orgasm month for me. My latest wait was just 7 days. In her post yesterday, Mrs. Lion gave reasons why she decided to let me come so soon. I’m not sure I buy them. Once she can get me all the way to the edge, it doesn’t seem long before she can’t seem to help herself. I had a very good time and I’m not complaining.

evotion orion ring to hold penis head in place
Evotion Orion ring to hold penis head in place

The new, larger shaft section for my Evotion Orion arrived today. About a month ago I suffered two penis injuries. One was a little sore just under the head. It was most likely caused by the internal ring in the shaft section of the device (see picture). This ring keeps the head in place. It’s a wonderful part of the design. I believe that I ordered too short and a bit too narrow a shaft section in the original device. The other was a lioness bite. She got a little too enthusiastic during oral sex.

I had a similar problem with the Cherry Keeper device which has a shelf inside designed to hold the head in place. The shelf rubbed just under the head a bit too much and I got a sore. The Evotion product has a much more gentle solution. Its molded-in ring offers more surface area than the Cherry Keeper shelf. Since my first custom cage, the Jail Bird, I’ve used a shaft diameter of 1-1/4 inches. This is about 1/4 inch narrower than my early measurement.

It was perfect for the Jail Bird. Apparently, the more closed-in design of the Orion, coupled with the head-retaining ring required a more accurate measurement. I ordered the new shaft piece 2mm more in diameter. This is only 5/64-inches. It should be enough to reduce the rubbing on the tender skin just under the head. I also ordered the length 16mm longer, which is 5/8-inches.

I needed the shorter length in the Jail Bird to assure that even if my penis was cold-shower length (about1-1/4 inch), the head would still be pressed firmly against the front of the cage. That measurement was taken from the tip to the base on the underside where it connects with the scrotum. The Evotion measurement is taken along the top, from the body to the base of the head. My most accurate measurement is 47mm (a little more than 1-3/4 inches).

The new shaft piece looks a lot more substantial. That tiny 2mm increase in diameter looks much larger to me. Of course, it isn’t. The increased length is dramatic. Mrs. Lion promises to lock me into it later today. We’ll get a picture and share it with you.

Since we began male chastity seven years ago, device design and manufacture have evolved considerably. The Mature Metal line of cages, which includes the Jail Bird that I wore for years, was fabricated out of welded stainless steel bars and sheet. They are made by hand and are necessarily simple designs.

With the growing maturity of 3D printing, a new kind of male chastity device has emerged. These devices are designed on a computer and then printed in nylon or other materials into finished chastity devices. Complex shapes are very easy to accomplish. Custom sizing is precise and can accomodate virtually any number of individually-measured dimensions. The Evotion Orion is the current champ in terms of customization.

It isn’t easy to figure out how to make a device that will effectively stop a penis from erection and ejaculaton while still being comfortable to wear 24/7. Very few makers have. The relatively crude Jail Bird is comfortable and effective. The Orion is the next generation. It is so light weight that I completely forget it is locked on me. It’s comfortable and best of all, I can pee in it standing up without any fear of spraying.

The price is average for custom male chastity devices; at this time between $350 and $400. Reprints with size adjsutments are reasonably priced. If you wear the device full time, plan to make one or two changes as you spend time in the it.

This is the first time I’ve had to increase the size of a device. I’ll let you know how it works.